Duracoat Rust Guard Metal Primer | Superior Corrosion-Resistant Protection

An excellent choice for premium finish

Duracoat Rust Guard Metal Primer

The new generation water based 100% acrylic non toxic anti-corrosive metal primer for use on degreased Galvanised steel and rust free, clean dry mild steel.

Features & Benefits

An anti-corrosive primer suitable for use in the tropical environment
Excellent Adhesion
Very good Flow and levelling
Virtually odour free
Low VOC VOC < 30 gm/ltr

Technical data

Recommended Area

Degreased and/or Weathered Galvanised steel & Rust free, clean, dry Mild steel
Pack Sizes

1L, 4L, 20L
Available Shades

Red Oxide, Grey
Spread Rate

1st Coat: 6 - 8 Sq. Mt/LtrSubsequent Coats: 7 - 9 Sq. Mt/Ltr
Dilution

Do not dilute
Recommended number of coats

1 - 2 Coats
Application Method

Brush, Roller or Spray
Touch Dry Time

4 - 6 Hours
Recoating Time

Product Information Sheet

How to apply

Step 01

Duracoat Rust Guard Metal Primer

1 coat
Step 02

Duracoat High Performance Acrlic Metal Coating

Top Coat

Dilution

Do not dilute

Drying Time between coats

4 - 6 Hours

Paint budget calculator

Type of Project :

Fresh Painting
Re-Painting

Type of Space :

Interior
Exterior

Carpet Area :

Surface preparation

For rusted Metal, affected areas need to be cleaned back to bright metal by hand mechanical or blast cleaning, after that apply Etching Solution.
For new metal: Surfaces need to be degreased to remove the manufacturer’s grease protective layer, after that apply Etching Solution.
Do not apply on exterior if it looks like rain will occur with in 4-6 hours of application