Duracoat Smotex | bascopaints

The perfect makeover for your house interiors

Duracoat Smotex

Duracoat Smotex is a ready mixed surfacing compound for cement plaster surfaces, appropriately primed wooden surfaces and ceiling boards, hardwood and softwood.

Features & Benefits

Hide constructional imperfections
Ready to use
Breathable Film
Excellent smoothness & superior whitness
Easy to Apply

Technical data

Recommended Area

For cement plaster surfaces, appropriately primed wooden surfaces and ceiling boards, hardwood and softwood.
Pack Sizes

5Kg, 20Kg
Available Shades

White
Spread Rate

1 Sq. Mt/Kg
Dilution

Do not dilute
Recommended number of coats

2 Coats
Application Method

Spatula, Trowel
Touch Dry Time

40 Minutes
Recoating Time

8 - 10 Hours

Product Information Sheet

How to apply

Step 01

Duracoat Vinyl Matt Deluxe

Primer
Step 02

Duracoat Smotex

1st Coat
Step 03

Duracoat Internal & External Skimcoat

2nd Coat

Dilution

Do not dilute

Drying Time between coats

8 - 10 Hours

Paint budget calculator

Type of Project :

Fresh Painting
Re-Painting

Type of Space :

Interior
Exterior

Carpet Area :

Surface preparation

Surface should be free from any loose paint, dust and grease. Growths of fungus, algaes or moss should be removed by wire brushing and water
If the final coat is one of the high quality Duracoat Emulsions, it will be necessary to thoroughly dust off sanding residue before applying the emulsion finish.
If the final coat is one of the high quality Duracoat Gloss, then one coat of Duracoat Universal Undercoat will be mandatory after thoroughly dusting off the sanded Duracoat Smotex Ultimate Smooth Finish
For new and old Cement Plaster Surfaces, Prime first, apply one coat of Duracoat Smotex Ultimate Smooth Finish on all joints and about 200MM on each side of joint. Allow to dry hard and smoothen with sand paper.
If joint is too wide on plaster boards, fix with fibreglass scrim. Apply two coats of Duracoat Smotex Ultimate Smooth Finish, levelling out to smooth surface or desired hard pattern on final coat ready for decoration allowing hard drying in between coats.