Duracoat WoodTech Polyurethane Varnish Stain

Beautify your homes with wooden finishes

DuraCoat Polyurethane Varnish Stain is a single pack polyurethane finish primarily intended for internal use. It is also suitable as a priming coat prior to overcoating with Duracoat Polyurethane Wood Seal Clear.

Features & Benefits

Preserves & Enhances Wood Grain
Excellent Penetration
Excellent Adhesion
Easy to Apply

Technical data

Recommended Area

Suitable for wood flooring work, chip board, hard board, woodwork furniture & all interior timbersurfaces
Pack Sizes

1L, 4L
Available Shades

Clear, Mahogany, Walnut, Light Oak,Mid Oak, Dark Oak
Spread Rate

16 - 18 Sq. Mt/Ltr
Dilution

Ready to use/When applying by spray, thin to sprayable viscocityusing the Duracoat White Spirit
Recommended number of coats

1 Coat
Application Method

Brush, Spray or Cloth Fabric
Touch Dry Time

2 - 4 Hours
Recoating Time

24 Hours

Product Information Sheet

How to apply

Step 01

Duracoat WoodTech Polyurethane Varnish Stain

primer
Step 02

Duracoat WoodTech Polyurethane Varnish Stain

1st Coat
Step 03

Duracoat WoodTech Polyurethane Varnish Stain

2nd Coat

Dilution

Ready to use
When applying by spray, thin to sprayable viscocity
using the Duracoat White Spirit

Drying Time between coats

24 Hours

Paint budget calculator

Type of Project :

Fresh Painting
Re-Painting

Type of Space :

Interior
Exterior

Carpet Area :

Surface preparation

All surfaces to be painted must be clean, dry and free from dusts, grease or any loose material.
All traces of Wax or Oil should be removed by power sanding particularly if wax had been used on the surface before.
The moisture content should not exceed 12% prior to coating.
Sand the surface using emery paper ,wipe of the dust and dirt before applying top coat