Duracoat WoodTech Polyurethane Woodseal

Beautify your homes with wooden finishes

DuraCoat WoodTech Polyurethane Wood Seal is a hard glaze, one pack polyurethane finish primarily intended for internal use. It is based on polyurethane modified alkyd. It is suitable for wood flooring work, chipboard, hardboard, woodwork, furniture and all other interior timber surfaces. It preserves and enhances wood grain, resists stains caused by hot water, dilute domestic acids, alcohols and oil.

Features & Benefits

Resists stain caused by hot water
Resistance to mild household chemicals
Preserves & Enhances Wood Grain
Tough & Flexible Film

Technical data

Recommended Area

Suitable for wood flooring work, chip board, hard board, woodwork furniture & all interior timbersurfaces
Pack Sizes

1L, 4L
Available Shades

Clear, Mahogany, Walnut, Light Oak,Mid Oak, Dark Oak
Spread Rate

16 - 18 Sq. Mt/Ltr
Dilution

Ready to use/When applying by spray, thin to sprayable viscocityusing the Duracoat White Spirit
Recommended number of coats

2 - 3 Coats
Application Method

Brush, Spray or Cloth Fabric
Touch Dry Time

2 - 4 Hours
Recoating Time

24 Hours

Product Information Sheet

How to apply

Step 01

Duracoat WoodTech NC Sanding Sealer

primer
Step 02

Duracoat WoodTech Polyurethane Woodseal

1st coat

Paint budget calculator

Type of Project :

Fresh Painting
Re-Painting

Type of Space :

Interior
Exterior

Carpet Area :

Surface preparation

All surfaces to be painted must be clean, dry and free from dusts, grease or any loose material.
All traces of Wax or Oil should be removed by power sanding particularly if wax had been used on the surface before.
The moisture content should not exceed 12% prior to coating.
Apply one coat of Basco NC Sanding sealer. Allow to dry for 2-3 hours.
Sand the surface using emery paper ,wipe of the dust and dirt before applying top coat